wHiPi. Crown Blow Dryer User Manual
Digital User Manual
meet your
Crown Blow Dryer
Healthy hair is not hard. It starts at the scalp.


Item No. 000-901
Welcome to Your Crown.
Welcome to the wHiPi. Crown Blow Dryer, the foundation of the wHiPi. system.
Great hair does not come from doing more. It comes from using the right tools, designed to work together. Powered by wHiPi. CrownHeat™ Technology and a high-speed brushless (BLDC) motor, your Crown Blow Dryer dries fast with a scalp-first approach, helping reduce unnecessary heat exposure while supporting long-term hair health.
When you start with intention, the rest follows.
Before first use
- Remove all packaging, tags and protective film.
- Read the Important Safety Instructions first.
- Check the cord and plug for any damage.
- Bookmark this manual. You can always reopen it with the QR code inside your box.
Important Safety Instructions
Read all instructions before using. Save these instructions.
When using any electrical appliance, especially when children are present, basic safety precautions should always be followed, including the following.
Danger
Any hair dryer is electrically live even when the switch is off. To reduce the risk of death or injury by electric shock:
- Always unplug the dryer immediately after using it.
- Do not use while bathing or in the shower.
- Do not place or store the dryer where it can fall or be pulled into a tub or sink.
- Do not place in, or drop into, water or any other liquid.
- If the dryer falls into water, unplug it immediately. Do not reach into the water.
Warning
To reduce the risk of burns, electrocution, fire or injury to persons:
- Never leave the dryer unattended when it is plugged in.
- This dryer should not be used by, on or near children or individuals with certain disabilities. It is not a toy. Keep it away from children.
- Use the dryer only for its intended use as described in this manual. Do not use attachments not recommended by wHiPi.
- Never operate the dryer if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged or dropped into water. Contact wHiPi. Customer Care for examination and repair.
- Keep the cord away from heated surfaces. Do not pull, twist or wrap the cord around the dryer, even during storage.
- Never block the air openings or place the dryer on a soft surface, such as a bed or couch, where the openings may be blocked. Keep the air openings free of lint, hair and debris.
- Never use while sleeping.
- Never drop or insert any object into any opening.
- Do not use outdoors, or where aerosol (spray) products are being used or oxygen is being administered.
- Do not use an extension cord.
- Do not direct hot air toward the eyes or other heat-sensitive areas.
- Do not place the dryer on any surface while it is operating.
- Keep your hair out of the dryer and away from the air inlets while in use.
- Do not use with a voltage converter.
Caution: hot surfaces
- This tool gets very hot during use and stays hot after it is switched off.
- Do not let heated surfaces touch your eyes, face, ears, neck, scalp or bare skin.
- Keep fingers clear of heated surfaces. Hold the tool by the handle only.
- If a burn occurs, cool the area with cool running water and seek medical attention if needed.
- Attachments may be hot during use. Allow them to cool before handling.
Power and plug
- For household use. Designed to operate at 110 to 127 volts AC, 60 Hz. Use only on the voltage shown on the rating label.
- Polarized plug: one blade is wider than the other, so the plug fits a polarized outlet only one way. If it does not fit fully, reverse it. If it still does not fit, contact a qualified electrician. Never try to defeat this safety feature.
- 1600 W (120V) operating guide: using the dryer on the same circuit or fuse as other appliances may trip a 13 amp breaker or blow a 13 amp fuse. Never replace a fuse with one rated higher than the circuit's capacity; doing so could cause an electrical fire.
ALCI safety plug: test every time
Your dryer has an Appliance Leakage Circuit Interrupter (ALCI), a safety feature that makes it stop working under some abnormal conditions, such as immersion in water.
- Plug in and press TEST on the plug.
- The dryer stops, you hear a click, and RESET pops out. This means the ALCI is working.
- To reset, unplug, push RESET in, and plug back in.
- If the ALCI LED light flashes continuously, the ALCI is not working. Stop using the dryer and contact wHiPi. Customer Care.
- If the dryer has been immersed in water, do not reset or use it. Contact wHiPi. Customer Care immediately.
- If the dryer stops and RESET pops up during use, unplug it and let it cool, then plug back in. If it does not work normally, contact us for service.
Save these instructions. For household use.
Meet Your Crown
Most traditional blow dryers rely on aggressive heat and harsh airflow concentrated at the scalp. The Crown Blow Dryer balances fast, powerful airflow with four precise heat settings, so hair dries thoroughly without repeated passes or excessive heat. Less stress at the roots. More consistency. Better hair over time.
Plasma ion technology works while you dry, helping smooth the hair surface, reduce static and frizz, and boost shine. A slim T-shaped body keeps it light and comfortable in your hand.
Key features
What is in the box

- wHiPi. Crown Blow Dryer
- Smoothing Nozzle
- Styling Nozzle (concentrator)
- Orange wHiPi. storage and travel bag
- Filter cleaning brush
- A QR code inside the box that opens this digital manual
Get to Know Your Tool
1234567
-
1Magnetic nozzle
Smoothing or Styling Nozzle. Both snap on magnetically. -
2LCD display
Shows your mode, temperature level and airflow level at a glance. -
3Control buttons
Top to bottom: Temperature, Airflow and Mode. -
4Air inlet and magnetic filter cover
Easy-attach rear filter. Keep it clear of lint and hair. -
5Cool Shot
A burst of cool air to set your style. -
6Power ON/OFF
Power switch on the back of the handle. -
7Hanging ring and ALCI safety plug
Hang to store. The plug has TEST and RESET buttons.
Using the Controls
| To | Do this |
|---|---|
| Turn on | Plug in and switch Power ON. The LCD display lights up. |
| Set the temperature | Press the Temperature button (top) to move through 4 settings: Cool, 60°C (140°F), 80°C (176°F) and 110°C (230°F). |
| Set the airflow | Press the Airflow button (middle) to move through 3 air speeds: low, medium and high. |
| Choose a mode | Press the Mode button (bottom) to move through SILKY, SCALP and SWING, then back to manual control. |
| Cool Shot | Press the Cool Shot button on the front of the handle for cool air to set your style. |
| Smart Memory | Your Crown remembers your last mode, temperature and airflow and starts there next time. |
| Turn off | Switch Power OFF and unplug. |
While SILKY, SCALP or SWING is selected, the Temperature, Airflow and Cool Shot buttons are paused. Press Mode until you return to manual control to use them again.
Attachments
| Attachment | Use it for |
|---|---|
| Smoothing Nozzle | Fast drying with soft, powerful airflow. |
| Styling Nozzle | Fast, precise styling with concentrated airflow. Pair it with a brush. |
| Diffuser (sold separately) | Rich root volume and natural curl. |
Nozzles attach magnetically: simply hold one to the front of the dryer and it snaps into place. Switch the dryer off before changing nozzles. Attachments may be hot during use, so let them cool before handling.
Heat Settings Guide
Three intelligent modes, built to adapt to real hair and real routines. Or take full control with four heat settings and three air speeds. Start with the gentlest setting that dries your hair well.
| Setting | What it does |
|---|---|
| SILKY High heat, light airflow |
Dries while delivering a smooth, glossy, frizz-free finish. Your salon-quality, silky-smooth blowout. |
| SCALP Low heat, medium airflow |
Gently dries the scalp and roots while maintaining moisture balance, and helps lay down short flyaways. |
| SWING Alternating warm and cool, medium airflow |
Automatically cycles between warm and cool air. The cool air helps seal the cuticle, lock in moisture and reduce heat exposure. |
| Manual: heat | Cool, 60°C (140°F), 80°C (176°F), 110°C (230°F) |
| Manual: air speed | Low, medium, high |
Heat-smart habits
- Always use a heat protectant before heat styling.
- Higher heat is not faster. If a section is not responding, take a smaller section or slow down before you turn the heat up.
- Fine, lightened, color-treated or damaged hair needs less heat, not more.
- If you hear sizzling or smell scorching, stop. Make sure hair is completely dry and lower the temperature.
- Give your scalp space. Keep heated surfaces away from the skin at your roots, hairline, ears and neck.
How to Use
- PrepShampoo and condition. Towel-dry to remove excess moisture, then detangle with a wide-tooth comb.
- ProtectApply your favorite heat protectant and any wHiPi. styling product.
- Test the ALCI plugPlug in and press TEST on the plug. The dryer stops and RESET pops out with a click. Unplug, press RESET in, and plug back in. Do this every time. If the test fails, do not use the dryer.
- Choose your settingSwitch Power ON. Pick SILKY, SCALP or SWING, or set temperature and airflow yourself. Start at a lower setting.
- Rough dryWith the Smoothing Nozzle on, dry one section at a time, moving the dryer steadily so air passes through the hair. Direct airflow at the hair, not the scalp. Keep the air inlet clear of hair.
- StyleSwitch to the Styling Nozzle and dry each section over your brush, pointing airflow from roots to ends. Never concentrate heat on one section for long.
- SetFinish with the Cool Shot to close the hair cuticle and lock in your style.
- FinishSwitch off, unplug and let the dryer cool. Finish with your favorite wHiPi. product for shine and hold.
Styling Tips
- Body and volume: turn your head upside down while drying and direct airflow toward the roots for maximum lift. When dry, toss your head back and brush into place.
- Super-straight: work in sections with a large round brush (about 2 inches), holding hair taut and bending the ends slightly under as you dry.
- Natural waves: grasp hair at the roots and scrunch between your fingertips while drying.
- Curls: dry almost completely on a warmer setting with the Diffuser, then finish with the Cool Shot.
- Quick touch-ups between washes: mist hair lightly with water, then style.
- SCALP mode is your everyday friend for roots and flyaways. SWING is ideal for longer drying sessions.
- Use it as a system. Follow with the wHiPi. Crown Thermal Blowout Brush or Crown Curling Iron for a finished look.
Care, Cleaning and Storage
Care and cleaning
- Clean the rear filter weekly, with the dryer unplugged. Lint buildup slows the dryer down and can make it stop working.
- To clean: hold the handle firmly and pull the magnetic rear filter and outer filter away from the dryer. Use the included filter cleaning brush to remove debris from both filters and the outside of the filter mesh, then put both filters back into position.
- Never use water to clean the filter, and do not press hard on the filter mesh.
- Do not try to remove the inlet mesh. It is permanently attached.
- Wipe the outside of the dryer with a dry cloth only. Never immerse the dryer in water.
- Inspect the cord often. Stop using the dryer immediately if the cord is damaged or the dryer stops or runs intermittently. Never attempt repairs yourself; contact wHiPi. Customer Care.
Storage
- Unplug and let the dryer cool before storing.
- Fold the handle for compact storage and zip the dryer and nozzles into the orange travel bag.
- Store in a safe, dry place, out of reach of children.
- Hang it by the hanging ring or lay it flat.
- Never wrap the cord around the dryer. Let it hang or lie loose and straight where it enters the dryer. Do not jerk or strain the cord at the plug.
Healthy hair does not require overthinking. Use tools designed to work together. The rest will come.
Troubleshooting
IfThe dryer will not turn on.
Check the plug is fully in and the outlet works. Press RESET on the ALCI plug, then switch Power ON. If the dryer still will not run, contact us.
IfThe dryer stopped and RESET popped out during use.
Unplug and let the dryer cool. Plug back in and press RESET. It should then work normally. If not, stop using it and contact us.
IfThe ALCI light is flashing continuously.
The ALCI is not working correctly. Stop using the dryer and contact us for service.
IfThe dryer or the heat shut off by itself.
The overheat protection has switched it off, usually because the filter or air inlet is blocked. Unplug, let it cool for 10 to 15 minutes, clean the filter, then restart.
IfAirflow feels weak.
Clean the rear filter and inlet mesh. If the dryer still will not run properly after cleaning, do not use it; contact us.
IfThe buttons do not respond.
In SILKY, SCALP or SWING mode, the temperature, airflow and Cool Shot buttons are paused. Press Mode until you return to manual control.
IfA circuit breaker tripped.
At 1600 W (120V), using the dryer on the same circuit as other appliances can trip a 13 amp breaker or blow a 13 amp fuse. Use a different circuit. Never replace a fuse with a higher-rated one.
IfIt does not work abroad.
Check the voltage on the rating label before travelling. This dryer is intended for USA household use on 110–127V AC, 60 Hz. Do not use it with a voltage converter.
Still need help? Email hello@whipico.com with your order number and a short description or video. We usually reply within 2 to 3 business days.
Specifications
| Product | wHiPi. Crown Blow Dryer |
|---|---|
| SKU / Item No. | 000-901 |
| Voltage | USA household use, 110–127V AC, 60 Hz |
| Rated power | 1600 W at 120V |
| Motor | Brushless DC (BLDC), 110,000 RPM |
| Heat settings | 4: Cool, 60°C / 140°F, 80°C / 176°F, 110°C / 230°F |
| Air speeds | 3 |
| Modes | SILKY, SCALP, SWING |
| Cool Shot | Yes |
| Memory | Smart Memory (last mode, temperature and airflow) |
| Ion technology | Plasma ions |
| Nozzles | Magnetic easy-attach Smoothing and Styling Nozzles. Diffuser sold separately |
| Filter | Magnetic easy-attach rear filter |
| Safety | ALCI plug with LED indicator, polarized plug, temperature regulator, overheat protection, current fuse |
Specifications may change as we refine our tools.
Warranty
At wHiPi., we stand behind the quality and durability of our tools. Our goal is to make sure your tools work as hard as you do, for life.
Lifetime Warranty: Core Tools
wHiPi. tools are covered by a Lifetime Warranty against defects in materials and workmanship. If your tool fails because of a manufacturing defect, we will repair or replace it. For this product, the core tool is: the Crown Blow Dryer.
What is covered
- Manufacturing defects
- Faulty materials
- Workmanship issues under normal use
What is not covered
- Damage from misuse, abuse or modification
- Normal wear and tear
- Cosmetic damage that does not affect function
- Loss or theft
Limited Warranty: Attachments and Accessories
Attachments, bits, blades and other accessories come with a 90-day Limited Warranty from the date of purchase. These items are expected to wear over time and are covered only for manufacturer defects, not regular wear from use. For this product, the nozzles, Diffuser, filter and orange travel bag are attachments and accessories.
How to make a claim
- Submit a claim through our Warranty Portal, or email hello@whipico.com with your order number and photos of the issue.
- We will review your claim and respond within 2 to 3 business days.
- If approved, we will repair, replace or refund the product, depending on the issue and availability.
Customers may be responsible for return shipping unless the item was defective on arrival. Our warranty is valid worldwide; shipping times and costs vary by location. Full terms: www.whipico.com/pages/warranty-information
Keep your order number or proof of purchase. You will need it for any claim.
Contact
Questions, styling help or a warranty claim? We would love to hear from you.
- Shop and supportwhipico.com
- Emailhello@whipico.com
- Instagram@whipi.co
- TikTok@whipico
- Facebookfacebook.com/Whipico
Dist. By wHiPi. Salisbury, NC 28147