wHiPi. Crown Curling Iron 1" User Manual
Digital User Manual
meet your
Crown Curling Iron
1" Barrel · Extra-LongDefined curls. Efficient heat. Healthier hair over time.
Item No. 000-903
Welcome to Your Crown.
Welcome to the wHiPi. Crown Curling Iron, the curling iron designed to work smarter, not hotter.
Powered by exclusive CrownHeat™ Technology, it delivers balanced, consistent heat across the barrel for efficient curl formation, professional results and healthier-looking hair over time. Because beautiful curls should never come at the expense of your hair.
Here is everything you need to create smooth, defined curls with long-lasting hold.
Before first use
- Remove all packaging, tags and protective film.
- Read the Important Safety Instructions first.
- Check the cord and plug for any damage.
- Bookmark this manual. You can always reopen it with the QR code inside your box.
Important Safety Instructions
Read all instructions before using. Save these instructions.
When using any electrical appliance, especially when children are present, basic safety precautions should always be followed, including the following.
Danger
To reduce the risk of electrocution:
- Always unplug the tool immediately after use.
- Do not use while bathing or in a shower.
- Do not place or store the tool where it can fall or be pulled into a tub, sink or toilet.
- Do not place in, drop into or immerse in water or any other liquid.
- If the tool falls into water, unplug it immediately. Do not reach into the water.
Warning
To reduce the risk of burns, electrocution, fire or injury to persons:
- Never leave the tool unattended while it is plugged in.
- Close supervision is necessary when this tool is used by, on or near children or people with certain disabilities. Keep the tool and its cord out of reach of children, both while in use and while it cools.
- Use this tool only for its intended purpose, as described in this manual. Do not use attachments that are not recommended by wHiPi.
- Never operate the tool if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has been dropped into water. Contact wHiPi. for help.
- Keep the cord away from heated surfaces. Do not wrap the cord tightly around the tool, pull, twist or kink it.
- Never drop or insert any object into any opening.
- Do not use outdoors, where aerosol (spray) products are being used, or where oxygen is being administered.
- Do not use an extension cord.
- Do not place the tool on any surface while it is hot or plugged in. Rest it only on a heat-resistant surface.
- Allow the tool to cool completely before cleaning, handling attachments or storing.
- Do not use the tool if you are drowsy, or if you have reduced sensation in your hands or scalp.
- Do not attempt to open, repair or modify the tool. There are no user-serviceable parts inside.
Caution: hot surfaces
- This tool gets very hot during use and stays hot after it is switched off.
- Do not let heated surfaces touch your eyes, face, ears, neck, scalp or bare skin.
- Keep fingers clear of heated surfaces. Hold the tool by the handle only.
- If a burn occurs, cool the area with cool running water and seek medical attention if needed.
- The barrel and clamp get extremely hot. Use the heat-protective glove on your guiding hand and keep the barrel away from your face, ears, neck and scalp.
- Only hold the tool by the handle.
- Use only on human hair. For wigs, extensions or hairpieces, follow the maker's heat guidance first.
- Do not use with a voltage converter.
Save these instructions. For household use.
Meet Your Crown
Traditional curling irons often create uneven heat distribution, forcing hair to endure multiple passes and prolonged heat exposure. Our CrownHeat™ Technology helps maintain consistent barrel temperature from root to tip, so curls form faster and hold longer with fewer repeated passes.
The extra-long 1-inch barrel lets you wrap more hair per pass, style faster with fewer sections and create smooth, defined curls without harsh creasing. It suits all hair lengths and is especially ideal for medium to long hair.
Key features
What is in the box

- wHiPi. Crown Curling Iron 1" (long barrel)
- Storage pouch
- Heat-resistant mat
- Heat-protective glove
- Two sectioning clips
- A QR code inside the box that opens this digital manual
Get to Know Your Tool
1234567
-
1Tip
The tip of the barrel. -
21" Barrel · Extra-Long
Extended barrel to wrap more hair per pass. -
3Integrated clamp and lever
Press the lever to open the clamp and hold the ends of your hair. -
4Digital temperature display
Shows the temperature you are using. -
5On-tool controls
Controls on the handle. -
6Handle
Lightweight and ergonomic. -
7Cord
Power cord.
Using the Controls


| To | Do this |
|---|---|
| Turn on | Turn the iron on. The display lights up. |
| Set the heat | Use the temperature controls. Heat goes up to 450°F. |
| Turn off | Turn the iron off, then unplug. |
| Auto shut-off | The iron turns itself off automatically. Always switch off and unplug yourself; never rely on auto shut-off. |
Heat Settings Guide
Adjustable heat up to 450°F puts you in control, from soft waves to defined, long-lasting curls. Start low and only increase as needed.
| Your hair | Where to start |
|---|---|
| Fine, fragile, color-treated or lightened hair | Lowest settings |
| Normal or medium-texture hair | Middle settings |
| Thick, coarse or resistant hair | Higher settings, up to 450°F, only as needed |
| Maximum temperature | 450°F |
Heat-smart habits
- Always use a heat protectant before heat styling.
- Higher heat is not faster. If a section is not responding, take a smaller section or slow down before you turn the heat up.
- Fine, lightened, color-treated or damaged hair needs less heat, not more.
- If you hear sizzling or smell scorching, stop. Make sure hair is completely dry and lower the temperature.
- Give your scalp space. Keep heated surfaces away from the skin at your roots, hairline, ears and neck.
How to Use
- PrepStart with clean, completely dry hair. Never curl wet or damp hair.
- ProtectApply heat protectant and let it absorb. Put the heat-protective glove on the hand that guides your hair.
- Plug in and setRest the iron on the heat-resistant mat, plug it in, turn it on and choose your temperature. Start low.
- SectionDetangle, then clip hair into sections with the sectioning clips. Take 1 to 2 inch sections; smaller sections give tighter, longer-lasting curls.
- ClampOpen the clamp with the lever and place the ends of a section between the clamp and barrel. Close the clamp.
- WrapRoll the iron up toward the root, keeping the barrel well away from your scalp, ears and neck. For a clamp-free wave, wrap the section around the barrel with the clamp closed, holding only the ends with your gloved hand.
- HoldHold for a few seconds. Fine hair needs less time; start short and adjust. Do not over-hold.
- ReleaseOpen the clamp and slide the iron out, letting the curl drop into your gloved hand. Let it cool before touching so it sets.
- FinishTurn the iron off, unplug it and let it cool on the heat-resistant mat. Shake out or brush through for softer waves.
Styling Tips
- Cool to set. Let each curl cool completely before you touch or brush it. That is where long-lasting hold comes from.
- Direction matters. Curl away from your face for an open, glamorous look. Alternate directions for natural, lived-in movement.
- Leave the ends out for an effortless, modern wave.
- Fewer passes, more polish. CrownHeat™ is designed so curls form faster; one well-held pass is better than repeating.
- Use the long barrel to your advantage: wrap larger sections to style faster on medium to long hair.
- Clip curls in place while they cool for extra hold on fine or straight hair.
- Pair it with the wHiPi. Crown Blow Dryer for a smooth, scalp-first base before you curl.
Care, Cleaning and Storage
Care and cleaning
- Always switch off, unplug and let the iron cool completely before cleaning.
- Wipe the barrel and clamp with a soft cloth. For product buildup, use a cloth that is only lightly damp, never wet, then dry thoroughly.
- Never use abrasive cleaners, scouring pads, solvents or sharp objects on the barrel.
- Never immerse the iron in water.
- Wipe the heat-resistant mat and the glove as needed.
- Check the cord and plug regularly. If you see any damage, stop using the iron and contact us.
Storage
- Store only once the iron is completely cool.
- Keep the iron, mat, glove and clips together in the storage pouch.
- Loosely loop the cord. Do not wrap it tightly around the barrel or handle.
- Store in a cool, dry place, out of reach of children.
Healthy hair does not require overthinking. Use tools designed to work together. The rest will come.
Troubleshooting
IfThe iron will not turn on.
Check that it is plugged in firmly and the outlet works. If the outlet has a TEST/RESET button, press RESET. Turn the iron on.
IfThe iron turned itself off.
The automatic shut-off has switched it off. Turn it back on.
IfCurls drop quickly.
Use smaller sections, let curls cool completely before touching, and use a holding product. Raise the heat a little only if needed.
IfCurls have a dent or crease.
Make sure the ends sit flat under the clamp, or try the clamp-free wrap.
IfI see steam.
This is usually moisture or product evaporating from the hair. Stop and make sure hair is completely dry. If smoke comes from the tool itself, unplug immediately and contact us.
IfThe display shows something unusual.
Turn off, unplug, let it cool, then try again. If it continues, contact us.
Still need help? Email hello@whipico.com with your order number and a short description or video. We usually reply within 2 to 3 business days.
Specifications
| Product | wHiPi. Crown Curling Iron 1" (long barrel) |
|---|---|
| SKU / Item No. | 000-903 |
| Barrel | Long barrel, 1" diameter |
| Temperature | Adjustable up to 450°F |
| Display | Digital temperature display |
| Auto shut-off | Yes |
Specifications may change as we refine our tools.
Warranty
At wHiPi., we stand behind the quality and durability of our tools. Our goal is to make sure your tools work as hard as you do, for life.
Lifetime Warranty: Core Tools
wHiPi. tools are covered by a Lifetime Warranty against defects in materials and workmanship. If your tool fails because of a manufacturing defect, we will repair or replace it. For this product, the core tool is: the Crown Curling Iron.
What is covered
- Manufacturing defects
- Faulty materials
- Workmanship issues under normal use
What is not covered
- Damage from misuse, abuse or modification
- Normal wear and tear
- Cosmetic damage that does not affect function
- Loss or theft
Limited Warranty: Attachments and Accessories
Attachments, bits, blades and other accessories come with a 90-day Limited Warranty from the date of purchase. These items are expected to wear over time and are covered only for manufacturer defects, not regular wear from use. For this product, the storage pouch, heat-resistant mat, heat-protective glove and sectioning clips are accessories.
How to make a claim
- Submit a claim through our Warranty Portal, or email hello@whipico.com with your order number and photos of the issue.
- We will review your claim and respond within 2 to 3 business days.
- If approved, we will repair, replace or refund the product, depending on the issue and availability.
Customers may be responsible for return shipping unless the item was defective on arrival. Our warranty is valid worldwide; shipping times and costs vary by location. Full terms: www.whipico.com/pages/warranty-information
Keep your order number or proof of purchase. You will need it for any claim.
Contact
Questions, styling help or a warranty claim? We would love to hear from you.
- Shop and supportwhipico.com
- Emailhello@whipico.com
- Instagram@whipi.co
- TikTok@whipico
- Facebookfacebook.com/Whipico
Dist. By wHiPi. Salisbury, NC 28147