wHiPi. Crown Flatiron User Manual

← All wHiPi. user manuals

Digital User Manual

meet your

Crown Flatiron

Sleek. Intentional. A very wHiPi. entrance.

wHiPi. Crown Flatiron in a lime-green to pink gradient

Item No. 000-910

♡hello, gorgeous

Welcome to Your Crown.

Welcome to the wHiPi. Crown Flatiron, the lime-to-pink Crown Heat tool made to stand out on your vanity and work with the rest of the CrownHeat™ system.

Great hair does not come from doing more. It comes from the right tools, used with intention, and a scalp-first mindset that starts every routine at the root. This manual walks you through everything: how to set your heat, how to style, and how to care for your Crown so it cares for you.

Protect first. Style with intention. The rest will come.

Before first use

  • Remove all packaging, tags and protective film.
  • Read the Important Safety Instructions first.
  • Check the cord and plug for any damage.
  • Bookmark this manual. You can always reopen it with the QR code inside your box.
01safety first, always

Important Safety Instructions

Read all instructions before using. Save these instructions.

When using any electrical appliance, especially when children are present, basic safety precautions should always be followed, including the following.

Danger

To reduce the risk of electrocution:

  • Always unplug the tool immediately after use.
  • Do not use while bathing or in a shower.
  • Do not place or store the tool where it can fall or be pulled into a tub, sink or toilet.
  • Do not place in, drop into or immerse in water or any other liquid.
  • If the tool falls into water, unplug it immediately. Do not reach into the water.

Warning

To reduce the risk of burns, electrocution, fire or injury to persons:

  • Never leave the tool unattended while it is plugged in.
  • Close supervision is necessary when this tool is used by, on or near children or people with certain disabilities. Keep the tool and its cord out of reach of children, both while in use and while it cools.
  • Use this tool only for its intended purpose, as described in this manual. Do not use attachments that are not recommended by wHiPi.
  • Never operate the tool if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has been dropped into water. Contact wHiPi. for help.
  • Keep the cord away from heated surfaces. Do not wrap the cord tightly around the tool, pull, twist or kink it.
  • Never drop or insert any object into any opening.
  • Do not use outdoors, where aerosol (spray) products are being used, or where oxygen is being administered.
  • Do not use an extension cord.
  • Do not place the tool on any surface while it is hot or plugged in. Rest it only on a heat-resistant surface.
  • Allow the tool to cool completely before cleaning, handling attachments or storing.
  • Do not use the tool if you are drowsy, or if you have reduced sensation in your hands or scalp.
  • Do not attempt to open, repair or modify the tool. There are no user-serviceable parts inside.

Caution: hot surfaces

  • This tool gets very hot during use and stays hot after it is switched off.
  • Do not let heated surfaces touch your eyes, face, ears, neck, scalp or bare skin.
  • Keep fingers clear of heated surfaces. Hold the tool by the handle only.
  • If a burn occurs, cool the area with cool running water and seek medical attention if needed.
  • The heated plates reach high temperatures. Keep them away from your eyes, face, ears, neck and scalp.
  • Do not clamp the plates onto anything other than hair. Do not leave the plates resting on any surface while hot.
  • Use only on human hair. For wigs, extensions or hairpieces, follow the maker's heat guidance first.
  • This tool is dual voltage (100–240V, 50/60Hz). When travelling, use a plug adapter only. Do not use a voltage converter.

Save these instructions. For household use.

Back to top ↑

02product overview

Meet Your Crown

Powered by wHiPi. CrownHeat™ Technology, the Crown Flatiron is designed to style efficiently, with adjustable temperature controls and a digital display so you can see the heat you are using.

Traditional flat irons often push you to crank the heat and pass over the same section again and again. The Crown Flatiron is built around balanced, controlled heat with on-tool adjustments you can actually see. Less guesswork. More polish. Healthier-looking hair over time.

Key features

CrownHeat™ Technology for balanced, controlled heat
Fast PTC heater with NTC temperature control
6 temperature settings
LCD temperature display
On-tool power and temperature controls (+ / −)
Straightens, curls and styles all hair types
Dual voltage: 100–240V, 50/60Hz
2 m (about 6.6 ft) cord with UL plug
Lime-to-pink finish with the wHiPi. logo

What is in the box

  • wHiPi. Crown Flatiron
  • A QR code inside the box that opens this digital manual

Back to top ↑

03parts and controls

Get to Know Your Tool

wHiPi. Crown Flatiron shown open and closed1234
  1. 1
    Heating plates
    The plates that glide over each section.
  2. 2
    Digital temperature display
    Shows the temperature you are using, so you always see your heat.
  3. 3
    On-tool controls
    Power button with + and − temperature buttons, on the inner arm.
  4. 4
    Cord
    2 m (about 6.6 ft) power cord with a UL plug.

Back to top ↑

04on-tool control

Using the Controls

Close-up of the Crown Flatiron digital temperature display
Digital display
Close-up of the Crown Flatiron power and + / − buttons
Power and + / − controls
To Do this
Turn on Press the power button ⏻. The display lights up and shows the temperature.
Raise the heat Press +. Each press moves up one of the 6 temperature settings.
Lower the heat Press −.
Turn off Press the power button, then unplug.

Back to top ↑

05find your perfect heat

Heat Settings Guide

The wHiPi. rule: start low, go slow, and only turn it up if your hair asks for it. Use the lowest temperature that gives you the result you want.

Your hair Where to start
Fine, fragile, color-treated or lightened hair Lowest settings
Normal or medium-texture hair Middle settings
Thick, coarse or resistant hair Higher settings, only as needed

Heat-smart habits

  • Always use a heat protectant before heat styling.
  • Higher heat is not faster. If a section is not responding, take a smaller section or slow down before you turn the heat up.
  • Fine, lightened, color-treated or damaged hair needs less heat, not more.
  • If you hear sizzling or smell scorching, stop. Make sure hair is completely dry and lower the temperature.
  • Give your scalp space. Keep heated surfaces away from the skin at your roots, hairline, ears and neck.

Back to top ↑

06step by step

How to Use

  1. PrepStart with clean, completely dry hair. Never use the Crown Flatiron on wet or damp hair.
  2. ProtectApply your favorite heat protectant from mid-lengths to ends and let it absorb.
  3. Plug inRest the iron, closed, on a heat-resistant surface and plug it in. Dual voltage means it works on 100–240V outlets; abroad, use a plug adapter only, never a voltage converter.
  4. Power on and setTurn the iron on and set your temperature with + and −. Start low.
  5. SectionDetangle, then clip your hair into sections. Work with sections about 1 inch (2.5 cm) wide.
  6. GlidePlace a section between the plates near the root, keeping the plates away from your scalp. Close gently and glide slowly and steadily from root to ends in one smooth pass. Do not hold the plates still on one spot.
  7. Repeat only as neededOne slow pass usually beats several fast ones. Let each section cool before you touch it so the style sets.
  8. FinishTurn the iron off, unplug it, and let it cool completely on a heat-resistant surface. Finish with your favorite wHiPi. styling product for shine and softness.

Back to top ↑

07crown-level results

Styling Tips

  • Slow and steady wins. A single, unhurried pass gives more polish than repeated quick ones, with less heat on every strand.
  • Comb chase: run a fine-tooth comb just ahead of the plates for an extra-sleek, glassy finish.
  • Soft bend: at the ends, turn your wrist gently under or out as you glide for a polished, finished shape.
  • Easy waves: twist the iron a half turn away from your face as you glide down a section, then shake out once cool.
  • Near the face and edges, lower the temperature and work slowly. Keep plates away from your forehead, ears and neck.
  • Second-day refresh: smooth only the top layer and the face-framing pieces at a low setting.
  • Let it cool to set it. Hair holds its shape best once it has cooled.
wHiPi. Crown Flatiron editorial: Straight Up Iconic.

Back to top ↑

08keep it iconic

Care, Cleaning and Storage

Care and cleaning

  • Always switch off, unplug and let the iron cool completely before cleaning.
  • Wipe the plates and housing with a soft cloth. For product buildup, use a cloth that is only lightly damp, never wet, then dry thoroughly.
  • Never use abrasive cleaners, scouring pads, solvents or sharp objects on the plates or display.
  • Never immerse the iron in water or hold it under running water.
  • Check the cord and plug regularly. If you see any damage, stop using the iron and contact us.

Storage

  • Store only once the iron is completely cool.
  • Close the plates.
  • Loosely loop the cord. Do not wrap it tightly around the iron, which can damage the cord over time.
  • Store in a cool, dry place, away from steamy bathrooms and out of reach of children.
the wHiPi. way

Healthy hair does not require overthinking. Use tools designed to work together. The rest will come.

Back to top ↑

09quick fixes

Troubleshooting

IfThe iron will not turn on.

Check that it is plugged in firmly and that the outlet works. If the outlet has a TEST/RESET button (common in bathrooms), press RESET. Press the power button. Still nothing? Contact us.

IfThe iron turned itself off.

Turn it back on. If it keeps turning off while in use, unplug it and contact us.

IfHair is not getting smooth.

Make sure hair is completely dry and sections are not too thick. Glide more slowly. Raise the temperature a little at a time, only if needed.

IfHair snags or pulls.

Detangle first and work with smaller sections. Clean any product residue from the plates once the iron is cool.

IfI see steam or a little vapor.

This is usually moisture or product evaporating from the hair. Stop and make sure hair is completely dry. If you see smoke from the tool itself or smell burning plastic, unplug immediately, stop using the iron and contact us.

IfThe display shows something unusual.

Turn the iron off, unplug it, let it cool, then try again. If it continues, contact us.

Still need help? Email hello@whipico.com with your order number and a short description or video. We usually reply within 2 to 3 business days.

Back to top ↑

10the details

Specifications

Product wHiPi. Crown Flatiron
SKU / Item No. 000-910
Voltage Dual voltage, 100–240V ~ 50/60Hz
Heater Fast PTC heater with NTC temperature control
Temperature control LCD display with + / − buttons, 6 temperature settings
Cord 2 m (about 6.6 ft), UL plug
Finish Lime-to-pink with the wHiPi. logo

Specifications may change as we refine our tools.

Back to top ↑

11we stand behind it

Warranty

At wHiPi., we stand behind the quality and durability of our tools. Our goal is to make sure your tools work as hard as you do, for life.

Lifetime Warranty: Core Tools

wHiPi. tools are covered by a Lifetime Warranty against defects in materials and workmanship. If your tool fails because of a manufacturing defect, we will repair or replace it. For this product, the core tool is: the Crown Flatiron.

What is covered

  • Manufacturing defects
  • Faulty materials
  • Workmanship issues under normal use

What is not covered

  • Damage from misuse, abuse or modification
  • Normal wear and tear
  • Cosmetic damage that does not affect function
  • Loss or theft

Limited Warranty: Attachments and Accessories

Attachments, bits, blades and other accessories come with a 90-day Limited Warranty from the date of purchase. These items are expected to wear over time and are covered only for manufacturer defects, not regular wear from use. Any accessories included with the Crown Flatiron are covered by this 90-day Limited Warranty.

How to make a claim

  1. Submit a claim through our Warranty Portal, or email hello@whipico.com with your order number and photos of the issue.
  2. We will review your claim and respond within 2 to 3 business days.
  3. If approved, we will repair, replace or refund the product, depending on the issue and availability.

Customers may be responsible for return shipping unless the item was defective on arrival. Our warranty is valid worldwide; shipping times and costs vary by location. Full terms: www.whipico.com/pages/warranty-information

Keep your order number or proof of purchase. You will need it for any claim.

Back to top ↑

12we are here for you

Contact

Questions, styling help or a warranty claim? We would love to hear from you.

Dist. By wHiPi. Salisbury, NC 28147

Back to top ↑

with love, wHiPi.

Scalp-First. System-Driven. Straight up iconic.

wHiPi. Crown Flatiron · Item No. 000-910
Dist. By wHiPi. Salisbury, NC 28147

https://www.whipico.com

$

en

 

Here is the personalized recommendation for you!

Add all to cart